# Heat pumps and old radiators: what should you check?
Yes, you can sometimes keep your radiators when installing a heat pump connected to a water-based central heating system. Compare each room's heating needs with the radiators' output at the planned water temperatures, then have the circuit examined. The age of the heat emitters is not enough to draw a conclusion. A study specific to your home should come before the choice of appliance.
## What heating needs should be calculated before choosing?
The [Buildwise guidance on heat pumps in renovation](https://www.buildwise.be/fr/metiers/chauffage-ventilation-et-climatisation/chauffage/pompes-a-chaleur-en-renovation/) distinguishes heat loss calculations, assessment of heat emitters and checks on flow rates in the distribution network. Heat losses are the heat lost by the building that the heating system must replace.
Ask for room-by-room results and a distinction between the home's current condition and its condition after the proposed work. Insulation that has yet to be installed remains an assumption, not an established fact. The EPB certificate can supplement the file without replacing this technical comparison.
## What output can the radiators provide?
The [summary of the Buildwise article on reusing radiators](https://www.buildwise.be/fr/publications/articles-buildwise/2024-04.01/) explains that their output at low temperature helps assess compatibility with an air-to-water heat pump. The 'temperature regime' means the water temperatures chosen for operation.
For each room, ask the heating professional to specify:
- The calculated heating requirement.
- The identified radiator and its characteristics.
- Its output at the planned temperature regime.
- The proposed adaptation if that output is insufficient.
A 'high temperature' label in a catalogue proves neither comfort nor savings for your home. Have the equipment actually present assessed and the necessary adaptations costed.
## What should be checked beyond the radiators?
Buildwise includes network flow rates, hydraulic adaptations, noise and the electrical connection among the points to examine. Ask how the existing circuit has been assessed and what the quotation includes.
The [SPW Énergie guidance](https://energie.wallonie.be/home/performance-energetique-des-batiments/batiments-residentiels/renovation-walloreno/conseils-pratiques/energies-renouvelables.html) also highlights the role of insulation and emitters suited to low temperatures. The choice depends notably on the site, climate and existing heating system. Have the proposed location and any necessary formalities checked, without assuming that one solution suits every situation.
## How should you compare solutions and their cost?
If some radiators do not meet the heating needs, ask for costed scenarios: adapting the emitters concerned, reducing demand through building work or reconsidering the heating solution. Each scenario should state its assumptions and the work on which it depends. No universal budget or saving can replace this quotation.
Our preparation advice is to gather:
- Plans and a description of the heated rooms.
- Evidence of insulation and planned work, clearly separated.
- Equipment references and radiator characteristics.
- Dated consumption records with their period and the way the home was used.
- The study and quotation with their assumptions and adaptations.
This list prepares a technical discussion; it is not a list of documents legally required for a sale. Past consumption does not guarantee future expenditure.
## What should you present when preparing a sale?
Distinguish installed heating from a project still being studied. Keep the supporting documents without claiming compatibility that has not been verified. Our [guide to documents for selling a house](https://youhome.immo/en/journal/documents-selling-house-belgium/) puts these documents in the context of the overall file.
To put your home in the Province of Liège in context, you can [request your valuation report](https://youhome.immo/en/valuation/request/). Property analysis does not replace the heating professional's study.
## What are the answers to frequently asked questions?
### Must all the radiators be replaced?
Not necessarily. Compare their output with each room's heating needs at the planned temperature regime, then have any useful adaptations costed.
### Is a high-temperature heat pump enough to guarantee the result?
No. The stated maximum temperature does not, on its own, prove comfort or savings in your home.
### Does the EPB certificate prove compatibility?
No. It can supplement the file, but it does not replace the assessment of heating needs, emitters and the distribution network.
EPB & renovation
Heat pumps and old radiators: what should you check?
Existing radiators can sometimes be kept with a heat pump. Check each room's heating needs, their output and the circuit before deciding.



